{"product_id":"eagletac-sx25l3-mt-g2-p0-led-2750-lumen-6-x-cr123-3x-18650-complete-kit","title":"EagleTac SX25L3 EGT-SX25K3MTG2KIT – 2750 Lumens, MT-G2 P0 LED, 3x18650 \/ 6xCR123A, Complete Kit","description":"\u003ch2\u003eEagleTac SX25L3 EGT-SX25K3MTG2KIT – 2750 Lumen MT-G2 Searchlight Kit\u003c\/h2\u003e\n\u003cp\u003eThe EagleTac SX25L3 EGT-SX25K3MTG2KIT is a triple-cell aluminum searchlight built around a Cree MT-G2 P0 LED putting out up to 2750 LED lumens (2375 ANSI FL-1 lumens) and throwing 317 meters. It runs on 3x18650 or 6xCR123A cells in series, uses a side button switch for on\/off and momentary output, and selects brightness levels by twisting the head.\u003c\/p\u003e\n\u003cp\u003eThis is the kit configuration, so the EagleTac SX25L3 EGT-SX25K3MTG2KIT adds a stainless steel bezel, a tailcap with switch and tail-standing ability, signal connection through the body tube for rear accessories, a heavy duty nylon holster with self-retention and open-top design, and the ET47 filter set: diffuser plus yellow, red, green, and blue.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCree MT-G2 P0 LED — 2750 LED lumens \/ 2375 ANSI FL-1 lumens maximum, cool tint\u003c\/li\u003e\n\u003cli\u003e317 meter maximum beam distance\u003c\/li\u003e\n\u003cli\u003eRuns on 3x18650 or 6xCR123A (series, 5.4V–19V operating range)\u003c\/li\u003e\n\u003cli\u003eRegular mode: four brightness levels — 2375\/2006\/1057\/175\/28 ANSI lumens, 1.5\/3.3\/21\/350 hour runtimes\u003c\/li\u003e\n\u003cli\u003eTactical mode: two levels plus Strobe I and Strobe II, 1.5\/19 hour runtimes\u003c\/li\u003e\n\u003cli\u003eInstant turbo and instant strobe from any level via the side switch\u003c\/li\u003e\n\u003cli\u003eHead-twist level selection with pre-selectable output and auxiliary settings\u003c\/li\u003e\n\u003cli\u003eProgrammable mode switching and energy-saving turbo step-down\u003c\/li\u003e\n\u003cli\u003eCrenulated bezel, SOS and beacon modes, aluminum body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEagleTac SX25L3 flashlight\u003c\/li\u003e\n\u003cli\u003eTailcap with switch and tail-standing ability\u003c\/li\u003e\n\u003cli\u003eStainless steel bezel\u003c\/li\u003e\n\u003cli\u003eHeavy duty nylon holster with self-retention, open-top design\u003c\/li\u003e\n\u003cli\u003eET47 diffuser filter plus yellow, red, green and blue ET47 filters\u003c\/li\u003e\n\u003cli\u003eMil-spec paracord lanyard with quick attachment clip\u003c\/li\u003e\n\u003cli\u003eFlat tail-cap for tail-standing\u003c\/li\u003e\n\u003cli\u003eSpare o-rings and user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum output: 2750 LED lumens \/ 2375 ANSI FL-1 lumens\u003c\/li\u003e\n\u003cli\u003eMinimum output: 35 LED lumens \/ 28 ANSI lumens\u003c\/li\u003e\n\u003cli\u003eBeam distance: 317 meters\u003c\/li\u003e\n\u003cli\u003eModes: 6 (plus strobe, SOS, beacon)\u003c\/li\u003e\n\u003cli\u003eBattery: 3 x 18650 or 6 x CR123A\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5.4V – 19V\u003c\/li\u003e\n\u003cli\u003eLength: 5.7\" (144 mm)\u003c\/li\u003e\n\u003cli\u003eHead diameter: 1.85\" (47 mm)\u003c\/li\u003e\n\u003cli\u003eBody diameter: 1.8\" (45.5 mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 10.9 oz (309 g) without batteries\u003c\/li\u003e\n\u003cli\u003eBody material: Aluminum, black\u003c\/li\u003e\n\u003cli\u003eSwitch: Side button; mode change by head twist\u003c\/li\u003e\n\u003cli\u003eBezel: Crenulated, stainless steel (kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat battery does the EagleTac SX25L3 EGT-SX25K3MTG2KIT use?\u003c\/h3\u003e\n\u003cp\u003eThe EagleTac SX25L3 EGT-SX25K3MTG2KIT runs on three 18650 rechargeable cells or six CR123A primaries, wired in series. Do not exceed 19V and do not use six 3.7V RCR123A cells. Batteries are not included.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum output of the EagleTac SX25L3 EGT-SX25K3MTG2KIT?\u003c\/h3\u003e\n\u003cp\u003eThe EagleTac SX25L3 EGT-SX25K3MTG2KIT reaches 2750 LED lumens, rated 2375 lumens under the ANSI FL-1 standard, with a maximum beam distance of 317 meters. The lowest level runs 28 ANSI lumens for up to 350 hours.\u003c\/p\u003e\n\u003ch3\u003eHow do you change modes on the EagleTac SX25L3 EGT-SX25K3MTG2KIT?\u003c\/h3\u003e\n\u003cp\u003eTwist the head of the EagleTac SX25L3 EGT-SX25K3MTG2KIT to select among four output levels — you can pre-select a level before switching on. Press and release the side button to turn the light on or off, hold it for momentary output, hold it at any level for instant turbo, or double-press and hold for instant strobe.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between regular mode and tactical mode?\u003c\/h3\u003e\n\u003cp\u003eRegular mode on the EagleTac SX25L3 EGT-SX25K3MTG2KIT gives four descending brightness levels for general use. Tactical mode collapses that to two levels plus Strobe I and Strobe II for faster access under stress. Switch between them by turning the light on at the first level, then dialing to the second level and back ten times within five seconds.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the EagleTac SX25L3 EGT-SX25K3MTG2KIT kit?\u003c\/h3\u003e\n\u003cp\u003eBeyond the light itself, the EagleTac SX25L3 EGT-SX25K3MTG2KIT includes a switch tailcap with tail-standing ability, a stainless steel bezel, a heavy duty nylon holster, the full ET47 filter set (diffuser, yellow, red, green, blue), a mil-spec paracord lanyard, a flat tail-cap, spare o-rings, and the user manual.\u003c\/p\u003e\n\u003ch3\u003eIs the EagleTac SX25L3 EGT-SX25K3MTG2KIT good for search and rescue or property use?\u003c\/h3\u003e\n\u003cp\u003eYes. With 2750 lumens from a large MT-G2 emitter, a 317 meter throw, a wide hotspot with generous spill, and 350 hours of runtime at its lowest level, the EagleTac SX25L3 EGT-SX25K3MTG2KIT suits search work, large property checks, and other jobs where a compact EDC light runs out of reach. The included colored filters also make it useful for signaling and low-impact night work.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy the EagleTac SX25L3 EGT-SX25K3MTG2KIT?\u003c\/h3\u003e\n\u003cp\u003eYou can buy the EagleTac SX25L3 EGT-SX25K3MTG2KIT at Going Gear, an authorized EagleTac dealer. It ships new in factory packaging with the full manufacturer warranty.\u003c\/p\u003e","brand":"EagleTac","offers":[{"title":"Default Title","offer_id":53026940092736,"sku":"EGT-SX25K3MTG2KIT","price":70.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/8953\/7088\/files\/egt-sx25k3mtg2kit-front-view.jpg?v=1786894665","url":"https:\/\/goinglights.com\/products\/eagletac-sx25l3-mt-g2-p0-led-2750-lumen-6-x-cr123-3x-18650-complete-kit","provider":"Going Lights","version":"1.0","type":"link"}