{"product_id":"eagletac-t25c2-1-x-18650-2-x-r-cr123a-cree-xp-l-1010-lumen-led-flashlight-no-kit","title":"Eagletac T25C2 1 x 18650 \/ 2 x (R)CR123A CREE XP-L 1010 Lumen LED Flashlight -No Kit","description":"\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHead Dia. 1.3 inches (33 mm)\u003c\/li\u003e\r\n\u003cli\u003eBody Dia. 1.0 inch (25.4 mm)\u003c\/li\u003e\r\n\u003cli\u003eLength: 5.7 inches (146 mm)\u003c\/li\u003e\r\n\u003cli\u003eWeight: 4.6 ounces (130 grams)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCircuit\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eC3300 Extreme3\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSynchronous buck w\/ efficiency of up to 95%\u003c\/li\u003e\r\n\u003cli\u003eNon-dimming constant current regulation for all output levels without flickering\u003c\/li\u003e\r\n\u003cli\u003eLow dropout voltage, enable circuit to current regulate even with a single 18650 for most of the runtime at turbo output.\u003c\/li\u003e\r\n\u003cli\u003eLow battery voltage warning\u003c\/li\u003e\r\n\u003cli\u003eTurbo boost technology\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eLens\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWaterwhite glass lens w\/ harden treatment\u003c\/li\u003e\r\n\u003cli\u003eAnti-reflective (AR) coating on both side (96% transparency)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperations\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTactical forward clicky switch\u003c\/li\u003e\r\n\u003cli\u003eBasic\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTurn on the light by pressing the tailcap button until it clicks.\u003c\/li\u003e\r\n\u003cli\u003eTwist the head to select between three output levels.\u003c\/li\u003e\r\n\u003cli\u003eTo access the lowest 4th level, turn the head to 3rd level, then 2nd level, and then back to 3rd level within one second.\u003c\/li\u003e\r\n\u003cli\u003eYou can pre-selected output level before turning on the light.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eAdvanced\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.\u003c\/li\u003e\r\n\u003cli\u003eSwitching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.\u003c\/li\u003e\r\n\u003cli\u003eTail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.\u003c\/li\u003e\r\n\u003cli\u003eEnergy saving feature (on by default): T25C2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, T25C2 reduces output by 8% instead. To toggle this feature, twist the head to 3rd level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable)\u003cstrong\u003e\u003c\/strong\u003e.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStainless Steel Bezel (Removable)\u003c\/li\u003e\r\n\u003cli\u003eSpare O-Rings\u003c\/li\u003e\r\n\u003cli\u003eTitanium Coated Pocket Clip\u003c\/li\u003e\r\n\u003cli\u003eUser Manual\u003c\/li\u003e\r\n\u003cli\u003eTail-stand Rubber Boot\u003c\/li\u003e\r\n\u003cli\u003eSoft Cigar Holding Grip\u003c\/li\u003e\r\n\u003cli\u003eCigar Grip Cover Ring\u003c\/li\u003e\r\n\u003cli\u003eLanyard Attachment Ring\u003c\/li\u003e\r\n\u003cli\u003eHeavy Duty Nylon Holster with Self-Retention Device\u003c\/li\u003e\r\n\u003cli\u003eMil-Spec Paracord Lanyard with Quick Attachment Clip\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAll models\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBase model \u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncludes everything listed in \"what's included\" section above. \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eFilter \u0026amp; Extended Tube Kit \u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncludes everything in base model, plus: \u003c\/li\u003e\r\n\u003cli\u003eET28 diffuser filter\u003c\/li\u003e\r\n\u003cli\u003eET28 yellow filter\u003c\/li\u003e\r\n\u003cli\u003eET28 red filter\u003c\/li\u003e\r\n\u003cli\u003eET28 green filter\u003c\/li\u003e\r\n\u003cli\u003eET28 blue filter \u003c\/li\u003e\r\n\u003cli\u003e3 cells extension body tube for three CR123A\/RCR123A \u003c\/li\u003e\r\n\u003cli\u003e4 cells extension body tube for four CR123A or two 18650 li-ion\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/ul\u003e","brand":"EagleTac","offers":[{"title":"Default Title","offer_id":53082868973888,"sku":"EGT-T25C2KNK-No Kit","price":89.9,"currency_code":"USD","in_stock":false}],"url":"https:\/\/goinglights.com\/products\/eagletac-t25c2-1-x-18650-2-x-r-cr123a-cree-xp-l-1010-lumen-led-flashlight-no-kit","provider":"Going Lights","version":"1.0","type":"link"}