Terminator M1 is Acebeam's first product that combines the latest LEP with LED technologies. Its LEP module produces a zoomable spotlight beam up to 1600 meters (1750 yards), with a distance of more than one mile! Easily switch between Spotlight or Floodlight with a shortcut key. Powered by a high capacity 5000mAh rechargeable USB-C 21700 Li-ion battery. The perfect replacement for the ultimate floodlight, spotlight, signal light or any light.
Dual Light Source: 1x LEP + 3x LEDs (Cool White 6500K / Nichia 519A 5000K High CRI90 for options)
Internal zoom design of LEP source, rotating the LEP head to adjust the focus without changing size.
Beam Angle: 3~16°
Max Output: 3500 lumens (LED);
700 lumens(LEP)
Max Throw: LEP: 1600 meters(640,000cd);
LED: 231 meters(13,340cd)
Impact Resistance: 1meter
Waterproof: IP68, underwater 2 meters
Battery: 1x ACEBEAM USB-C Rechargeable 21700 Li-ion Battery
Power Switch: ON/OFF and output modes cycle
Function Switch: LEP/LED switching
Size:
L:104mm/4.09''
W: 35.2mm/1.39''
H:63.4mm/2.5''
Weight: 232.2g/8.2oz (Excluding Battery); 304.6g/10.7oz (Including Battery)
Power Switch Operation
ON: Click the Power Switch.
OFF: Click the Power Switch when ON.
Output Selection: When the LED light source option is ON, press and hold the Power Switch, and the LED light source will cycle from Low-Med1-Med2-High, release the Power Switch to select the output, and can be memorized next ON;
Turbo: In the Unlocked state and under the LED light source option, double-click the Power Switch quickly to enter the Turbo output, and double-click again to switch between Turbo and memory output;
Strobe: In the Unlocked state and under the LED light source option, quickly press the Power Switch three times to enter the Strobe output;
Ultra-low: When the flashlight is OFF and under the LED light source option, press and hold the Power Switch to enter the Ultra-low output;
Ultra-low, Strobe, and Turbo modes will be not memorized.
Lock/Unlock
Lock: When the light is OFF, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and the flashlight will be Locked. At this time, any switch operation will be invalid.
Unlock: When the light is Locked, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and then Unlock the light. If the current light source option is LED, the LED will be Ultra-low ON when unlocked, and if the current light source option is LEP, the light will be LEP ON when unlocked.
Function Switch Operation
When the light is ON, click the Function Switch, the light output will switch between LEP light source or LED light source options.
LEP Zoom Operation
When the LEP light source is ON, rotate the LEP head left or right, and the LEP beam angle will increase or decrease uniformly between 16° and 3°.
