Armytek Partner A2 XM-L 330 Lumen 2 x AA

The reflectors of Armytek flashlights have been modeled and calculated in computer software for the design of optical systems that enabled to produce a flawless light beam for a long-range distances.

The completely new second-generation driver S-Tekâ„¢ enables the flashlight to emit bright and constant light even when the battery 18650 Li-Ion is almost discharged. S-Tekâ„¢ is the only driver in the world that enables the user to choose the type of stabilization.

We apply ultra-transparent and tempered glass with anti-reflective and lens coating, normally used in photo equipment only.  The transparency of the glass is 98-99%.

Our flashlights have a strong, difficult to break body made of aircraft-grade aluminum and developed for a minimum weight with sufficient durability. Premium type III hard anodizing 400HV.

Our flashlights have a strong, difficult to break body made of aircraft-grade aluminum and developed for a minimum weight with sufficient durability. Premium type III hard anodizing 400HV.

• Water resistance standard: IP68 (the highest)
• Metric profile thread has been used
• An O-ring has been used to increase glass sealing, and well as an extra L-ring of a specific shape

Two silicone O-rings are installed at each side of the battery tube of the flashlight to improve water resistance.

The flashlight is designed with the impact-resistant stainless steel bezels from both sides in order to protect it from falling and allow utilization during combat situations. In the Gold and Black version the steel bezels are also covered by titanium compounds with a hardness of 2000-3000HV.

The flashlight is designed with the impact-resistant stainless steel bezels from both sides in order to protect it from falling and allow utilization during combat situations. In the Gold and Black version the steel bezels are also covered by titanium compounds with a hardness of 2000-3000HV.

To ensure functionality in difficult conditions, the electronic driver of the flashlight is placed in a special aluminum capsule and has been completely covered with a durable compound. This actually protects it from both the environment and from mechanical damage.

The clip is functional and easy to use.

All threads, rubber parts and other parts of the flashlight that experience friction or contact with water are lubricated with a special dense grease NyoGel 760G.

The S-Tekâ„¢ driver, due to a built-in sensor, constantly monitors the temperature of LED and the electronic circuit and will prevent the LED overheating in extreme environments.

Armytek Predator has a Firefly mode with output of 0.1 lumens, working for 130 days with ONE 18650 Li-Ion battery.

Armytek is the first company in the world that produces flashlights with doubled critical electric circuits. Even when the main circuit is damaged, the system will be able to work on the reserve circuit, emitting light during 130 days, which enables the user to survive in an emergency situation.

Easy manipulation of modes and the possibility of full settings ability to fit your needs: many parameters can be changed - the brightness, the number of modes, the strobe frequency, the battery type, the type of brightness stabilization, the type of automemorization etc. However, if you don't want to change default settings - you can use ArmyTek Predator as an ordinary flashlight immediately, because it is ready after preparing on the factory.

You can save the defined individual settings in the Custom preset (the brightness, the number of modes, the strobe frequency, the battery type, the type of brightness stabilization, the type of automemorization etc.)

The S-Tekâ„¢ driver used in Armytek Predator has a built-in indication of low voltage and high temperature.

The S-Tekâ„¢ driver used in Armytek Predator has a built-in indication of low voltage and high temperature.

You can easily check the current battery voltage (ex.: 3 blinks – pause – 6 blinks = 3.6 Volts).

The voltage supply selection allows using the cheaper batteries without protection board (PCB), for example LiFePO4 or Li-Ion.

Advanced electronic protection from incorrect battery installation, without reducing the efficiency of the driver.

Constant and smooth light output. No irritating flicker effects.

Complete compatibility with LiFePO4 batteries, which can be fully charged in 10 minutes. In this flashlight LiFePO4 can be used safely for the batteries.