EagleTac SX25L3 EGT-SX25K3MTG2KIT – 2750 Lumen MT-G2 Searchlight Kit
The EagleTac SX25L3 EGT-SX25K3MTG2KIT is a triple-cell aluminum searchlight built around a Cree MT-G2 P0 LED putting out up to 2750 LED lumens (2375 ANSI FL-1 lumens) and throwing 317 meters. It runs on 3x18650 or 6xCR123A cells in series, uses a side button switch for on/off and momentary output, and selects brightness levels by twisting the head.
This is the kit configuration, so the EagleTac SX25L3 EGT-SX25K3MTG2KIT adds a stainless steel bezel, a tailcap with switch and tail-standing ability, signal connection through the body tube for rear accessories, a heavy duty nylon holster with self-retention and open-top design, and the ET47 filter set: diffuser plus yellow, red, green, and blue.
Key Features
- Cree MT-G2 P0 LED — 2750 LED lumens / 2375 ANSI FL-1 lumens maximum, cool tint
- 317 meter maximum beam distance
- Runs on 3x18650 or 6xCR123A (series, 5.4V–19V operating range)
- Regular mode: four brightness levels — 2375/2006/1057/175/28 ANSI lumens, 1.5/3.3/21/350 hour runtimes
- Tactical mode: two levels plus Strobe I and Strobe II, 1.5/19 hour runtimes
- Instant turbo and instant strobe from any level via the side switch
- Head-twist level selection with pre-selectable output and auxiliary settings
- Programmable mode switching and energy-saving turbo step-down
- Crenulated bezel, SOS and beacon modes, aluminum body
Kit Contents
- EagleTac SX25L3 flashlight
- Tailcap with switch and tail-standing ability
- Stainless steel bezel
- Heavy duty nylon holster with self-retention, open-top design
- ET47 diffuser filter plus yellow, red, green and blue ET47 filters
- Mil-spec paracord lanyard with quick attachment clip
- Flat tail-cap for tail-standing
- Spare o-rings and user manual
Specifications
- Maximum output: 2750 LED lumens / 2375 ANSI FL-1 lumens
- Minimum output: 35 LED lumens / 28 ANSI lumens
- Beam distance: 317 meters
- Modes: 6 (plus strobe, SOS, beacon)
- Battery: 3 x 18650 or 6 x CR123A
- Operating voltage: 5.4V – 19V
- Length: 5.7" (144 mm)
- Head diameter: 1.85" (47 mm)
- Body diameter: 1.8" (45.5 mm)
- Weight: 10.9 oz (309 g) without batteries
- Body material: Aluminum, black
- Switch: Side button; mode change by head twist
- Bezel: Crenulated, stainless steel (kit)
Frequently Asked Questions
What battery does the EagleTac SX25L3 EGT-SX25K3MTG2KIT use?
The EagleTac SX25L3 EGT-SX25K3MTG2KIT runs on three 18650 rechargeable cells or six CR123A primaries, wired in series. Do not exceed 19V and do not use six 3.7V RCR123A cells. Batteries are not included.
What is the maximum output of the EagleTac SX25L3 EGT-SX25K3MTG2KIT?
The EagleTac SX25L3 EGT-SX25K3MTG2KIT reaches 2750 LED lumens, rated 2375 lumens under the ANSI FL-1 standard, with a maximum beam distance of 317 meters. The lowest level runs 28 ANSI lumens for up to 350 hours.
How do you change modes on the EagleTac SX25L3 EGT-SX25K3MTG2KIT?
Twist the head of the EagleTac SX25L3 EGT-SX25K3MTG2KIT to select among four output levels — you can pre-select a level before switching on. Press and release the side button to turn the light on or off, hold it for momentary output, hold it at any level for instant turbo, or double-press and hold for instant strobe.
What is the difference between regular mode and tactical mode?
Regular mode on the EagleTac SX25L3 EGT-SX25K3MTG2KIT gives four descending brightness levels for general use. Tactical mode collapses that to two levels plus Strobe I and Strobe II for faster access under stress. Switch between them by turning the light on at the first level, then dialing to the second level and back ten times within five seconds.
What comes in the EagleTac SX25L3 EGT-SX25K3MTG2KIT kit?
Beyond the light itself, the EagleTac SX25L3 EGT-SX25K3MTG2KIT includes a switch tailcap with tail-standing ability, a stainless steel bezel, a heavy duty nylon holster, the full ET47 filter set (diffuser, yellow, red, green, blue), a mil-spec paracord lanyard, a flat tail-cap, spare o-rings, and the user manual.
Is the EagleTac SX25L3 EGT-SX25K3MTG2KIT good for search and rescue or property use?
Yes. With 2750 lumens from a large MT-G2 emitter, a 317 meter throw, a wide hotspot with generous spill, and 350 hours of runtime at its lowest level, the EagleTac SX25L3 EGT-SX25K3MTG2KIT suits search work, large property checks, and other jobs where a compact EDC light runs out of reach. The included colored filters also make it useful for signaling and low-impact night work.
Where can I buy the EagleTac SX25L3 EGT-SX25K3MTG2KIT?
You can buy the EagleTac SX25L3 EGT-SX25K3MTG2KIT at Going Gear, an authorized EagleTac dealer. It ships new in factory packaging with the full manufacturer warranty.
