The Niwalker Nova MM18 packs 5120 lumens into a versatile handheld light. Using two different LED types, the MM18 gives you both throw with the XM-L2 LED as well as flood with the MK-R LEDs. Two switches control each LED type, allowing you to control flood and throw independently or simultaneously. Four 18650 batteries power the light and give you access to multiple outputs ranging from 1 to 5120 lumens.
Features:
Utilizes total three U.S. made Cree emitters: 2 x MKR and 1 x XM-L2
Maximun output up to 5120 ANSI lumens
Highly effcient circuit design offers maximun output and runtime
Dual Multi-function clicky side switch with monentary activation and on/off
Memory function to remember last output etting used (except hidden modes)
Unigue reflector design provides great throw beam distance and beam pattern
Aircraft grade aluminum, mil-spec hard anodized for maximun wear
Toughened ultra-clear tempered glass lens with anti-reflective coating
Large cooper heat sink pad for superior thermal conductivity
Low battery LED indicator
Technical specification:
SPOT XML2:
1 lumens / 420hrs
8 lumens / 241hrs
95 lumens / 28hrs
588 lumens / 6.6hrs
760 lumens / 4hrs
955 lumens / 1.1hrs
FLOOD MKRx2:
3 lumens / 330hrs
17 lumens / 300hrs
160 lumens / 40hrs
648 lumens / 13hrs
1600 lumens / 4.6hrs
4270 lumens / 4.6hrs
SPOT+FLOOD:
4 lumens / 300hrs
24 lumens / 150hrs
253 lumens / 18hrs
1230 lumens / 4.2hrs
2200 lumens / 2hrs
5120 lumens / 2hrs
Beam distance:
SPOT / 341meters
FLOOD / 245meters
SPOT+FLOOD / 417meters
Peak beam intensity:
SPOT / 29000cd
FLOOD / 15000cd
SPOT+FLOOD / 43000cd
Waterproof: To IPX-7
Standard Impact resistance: 1M
Batteries: four high drain 18650 rechargeable batteries(not included)
Dimensions: 138mm(length) x 74mm(head diameter)
Weight: 499.1g (without battery)
Included accessories Lanyard, Holster Bag, Handle, Spare o-rings
User Interface
Turn the light ON/OFF by the side switch. Once you release the switch, the light comes on constant output mode.
Press-hold the switch from ON to cycle through all the modes: Mode 1 > Mode 2 > Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with mode memory.
Double-click from ON to access Turbo. Double-click again for strobe. Another double-click for SOS. Another double-click for beacon.
Single click the switch to turn the light off.
Turbo mode steps down to mode 5 when thermal protection kick in to prevent overheating.
When in standby, press-hold the switch for momentary activation
Double press and hold the switch for constant on (Second press-hold within 1.5s)
Double-click for instant strobe.
Lock-out mode is accessed by a rapid triple-click of the switch from OFF. Another triple-click re-activates.
Standby indicator flashes when batteries are connected but the light is not on. A brief green flash of the switch occurs every three seconds.
