Spyderco Byrd Meadowlark 2 BY04P2 – Stainless Steel EDC Pocket Knife
The Spyderco Byrd Meadowlark 2 BY04P2 brings the proven layout of Spyderco's best-selling Delica® to the byrd® value line, then dresses it in a satin-finished stainless steel handle. The heft, strength, and classic styling of Spyderco's earliest models are all here, with an index-finger choil that lets you choke up for detail work and a stout back lock that keeps the blade planted under load.
Its 2.97" 8Cr13MoV blade is full-flat ground for low-friction slicing and easy field sharpening, and the byrd® Comet-shaped hole opens it one-handed with either hand. A four-position pocket clip carries tip-up or tip-down, left or right, making the Spyderco Byrd Meadowlark 2 BY04P2 a genuinely ambidextrous EDC pocket knife. The chamfered stainless scales are also an ideal canvas for engraving. This listing is the PlainEdge™ (non-serrated) configuration.
Spyderco Byrd Meadowlark 2 BY04P2 Specifications
| Blade Steel |
8Cr13MoV stainless, satin finish |
| Blade Style |
Leaf-shaped, full-flat ground, PlainEdge™ |
| Blade Length |
2.97" (76 mm) |
| Cutting Edge |
2.57" (65 mm) |
| Blade Thickness |
0.1" (2.5 mm) |
| Handle Material |
Satin-finished stainless steel |
| Closed Length |
3.96" (101 mm) |
| Overall Length |
6.9" (175 mm) |
| Weight |
3.6 oz (101 g) |
| Lock |
Back lock (lockback) |
| Pocket Clip |
Four-position, ambidextrous |
| Origin |
China |
Frequently Asked Questions
What blade steel is used on the Spyderco Byrd Meadowlark 2 BY04P2?
The Spyderco Byrd Meadowlark 2 BY04P2 uses 8Cr13MoV stainless steel. It is corrosion resistant, takes a keen edge quickly, and is one of the easiest steels to bring back on a basic stone or ceramic rod — a big part of why this knife is such a practical daily carry.
What is a leaf-shaped blade?
A leaf-shaped blade has a gently curving belly that tapers to a centered point, giving you both slicing curve and piercing ability. On the Spyderco Byrd Meadowlark 2 BY04P2 that profile is combined with a full-flat grind, so the blade cuts with very little drag through cardboard, rope, and food.
How does the lock on the Spyderco Byrd Meadowlark 2 BY04P2 work?
The Spyderco Byrd Meadowlark 2 BY04P2 uses a back lock. A spring-loaded rocker bar drops into a notch in the blade tang when the knife opens; pressing the release in the middle of the spine lifts the bar so the blade can close. It works identically for left- and right-handed users.
Is the Spyderco Byrd Meadowlark 2 BY04P2 plain edge or serrated?
The Spyderco Byrd Meadowlark 2 BY04P2 sold here is the PlainEdge™ version with a fully unserrated cutting edge, which is the easier of the two to sharpen and the better choice for clean push cuts.
How do I sharpen the Spyderco Byrd Meadowlark 2 BY04P2?
Because the Spyderco Byrd Meadowlark 2 BY04P2 has a full-flat-ground 8Cr13MoV blade, a simple ceramic rod set or a guided sharpener at roughly 15 to 20 degrees per side will restore a shaving edge in minutes. Finish with a few light strops to remove the burr.
Is the Spyderco Byrd Meadowlark 2 BY04P2 legal to carry?
The Spyderco Byrd Meadowlark 2 BY04P2 is a manually opened folding knife with a 2.97" blade, which falls within the limits of most US jurisdictions. Blade-length rules vary by state and city, so check your local ordinances before carrying.
How is the stainless handle different from the FRN Meadowlark 2?
The Spyderco Byrd Meadowlark 2 BY04P2 uses satin-finished stainless steel scales with chamfered edges instead of molded FRN. That adds weight and rigidity, gives the knife a classic look, and provides a smooth surface that takes engraving well.
Where can I buy the Spyderco Byrd Meadowlark 2 BY04P2?
You can buy the Spyderco Byrd Meadowlark 2 BY04P2 at Going Gear, an authorized Spyderco dealer.
